Make it rain! (Part 2) – Creating rain with simple technique

Hello folks! 🙂

Hope you all are doing great!

So today I thought I’d share another technique I use to create my rain shots. I love rain and it’s always so much fun for me to create rain in my photos. I love the fact that how it changes the over-all atmosphere of an image and  turn an inanimate still into a scene!

This technique is pretty simple and I assume most of you might have already know about this. Still, let me show you my process 🙂

Props and tools:

To create rain I used a cheap plastic water spray bottle. I find this not only cheap and available but also I can actually control the force of water easily and get the ”rain” look I want. 



The key to get beautiful rain effect is to have a nice source of backlight. The backlight will make the raindrops visible. Also make sure the main subject is lit properly, I usually use a small white canvas to reflect light on my subject so that there’s no unwanted shadows because of  the backlight. I usually shoot in my balcony, using natural sunlight as the source of my backlight.


You have to think and adjust your camera shutter speed depending on how heavy you want the rain to look. The slower the shutter speed, the softer raindrops you’ll get. Here’s two photos to show you the difference.


Shot at 1/1600 sec


Shot at 1/640 sec

To get a beautiful bokeh in the background, use a larger aperture. I used f/1.8 with my 50mm lens. But if you don’t have a faster lens that’s Ok! You can create rain effect with any lens.


When you are done with your composition, it’s time to shoot! I usually shoot with my camera attached to my tripod and set to self-timer mode.  I just spray water onto my subject through the spray bottle during the exposure.

Things to remember:

Water can make a bit mess and will slightly change your composition. So leaving some space for rain drops would be a good idea. And water can block getting the details from the subject, so try to avoid spraying directly over your subject unless you’re going for that effect. It’s always good to start with some test shots to see if everything’s working perfectly and how the water effecting everything. And mostly, always be careful about your camera and lens. Keep them safe from the water.

So when you are ready, let it rain and shoot! I hope you have as much fun creating your own rainy shots as much I do 🙂 Do let me know if you want to know anything more or you want to share your thoughts. I’d love to hear from you 🙂

This is my final version after done with a colour treatment in photoshop.


Some examples of my other rainy shots



Behind the scene and speed-edit video

Make it rain – Shooting still life with rain




Make it rain! – creating rain and bokeh effect with water

Hello folks! 🙂

I hope you all are doing great and passing a wonderful time! Today I’m about to share a simple trick I use to create some of my rain photos. Usually I use a spray water bottle to make fake rain, but this method is for getting a bit more heavy rain look with more water droplets. It’s super easy and fun (and a bit messy too :P)

I always love to create rainy photographs, and since winter is coming there will be enough time to do more indoor shots. so lets bring little rain to your photos and make something beautiful 🙂

Props and tools

The things I use to create my photos are very simple. Small still life objects ( I used one of my sea shells here), something to sprinkle the water, towel or paper towels (lots!) and something to pour the water, (I used a teapot).

I thought of different options to make the water sprinkler, but for me the nice and most easy way was to make this one from an old empty soda bottle. I cut it in half and punched some holes and that’s it. At first I thought of using a watering can but that would be heavy to work with and also I had to buy it. So instead of buying I liked the idea of recycling and making my own little water sprinkler. This makes the water flow scattered and gives some big, beautiful drops.




To get some beautiful bokeh in the background you’ll need a source of backlight. I’ve shot this in my balcony where there’s plenty of natural sunlight available. I placed my subject in a corner where I could get nice backlight without causing much shadow cast in my subject. And to get rid of existing shadows, I used a little white reflector which was a cut sheet of styrofoam.



So now that I’m done with my composition it’s time to shoot! With my camera set to self-timer mode I poured water onto my subject through the sprinkler during the exposure. For this photo my camera setup was something like this: Shutter speed 1/1600 sec, Aperture f/1.8, ISO 640. You may need to adjust the shutter speed depending on how heavy you want the water drops to look. Slower shutter speed will make them appear softer.



Things to remember

Working with water is a bit critical and you should always be careful about your lens and camera. Just to be on the safe side, I highly recommend capturing some test shots before pouring water onto your neatly arranged subject. Also keep in mind that water will probably make a bit of mess and change your composition slightly, so leaving some space for rain drops and chaos would be a good idea.

So when you are all set up, let it rain! Pour water and make a series of shots. Another advantage of using a tripod is if you can’t get the picture you wanted you can always composite different images together and create the desired look. Just be careful with your electronic equipments and have fun. It’s always such fun to mimic the rain and if you can get some nice water crowns it will be icing on the cake! 🙂

This is my final result after post processing


Some other photos using this technique



I hope you like this little behind the scene story. Please do share your thoughts and also if you have any ideas, I’d love to hear from you! 🙂

I wish you all a very Happy and Creative day!

Behind the scene and speed edit video